门吸的安装方式有两种，一种是安装在地面上，还有一种是安装在墙面或者踢脚线板上。门吸的作用方式现在多为磁性原理，现在以一款安装在地板上的磁性门吸为例，为大家详解安装流程。
The door stopper can be installed in two ways, one is on the ground, and the other is on the wall or skirting board. The working mode of the door stopper is mainly based on the magnetic principle. Now take a magnetic door stopper installed on the floor as an example to explain the installation process.
1、首先要和业主确认门吸安装方式，是安装在地面上，还是安装在墙面上。因为这是卫浴间，业主决定门吸直接安装在地砖上，门后留置物空间。工人和业主正在确认具体安装位置，工人师傅在量尺寸，门后要留多少空间，无务必符合业主的心愿。
1. First, confirm with the owner whether the door stopper is installed on the ground or on the wall. Because this is the bathroom, the owner decided to install the door stopper directly on the floor tiles, leaving space behind the door. The workers and the owner are confirming the specific installation location...
2、第二步将门打开至需要的最大位置，测试门吸作用是否合理，门吸在门上的距离是否合适。定位门的位置，大致定位好之后，将门打开，试试实际操作是否合理，包括门吸是进去一点，还是出来一点，门吸的具体角度怎么样。
2. The second step is to open the door to the maximum position required, and test whether the function of the door stopper is reasonable and whether the distance between the door stopper and the door is appropriate. Position the door. After roughly positioning, open the door to see if the actual operation is reasonable...
3、最后确定位置后，在地面地砖上做定位，先定位门的停止位置。用铅笔在地砖上确认门的位置，工人师傅用铅笔在地上画线，先确认门开的最后位置，下一步确认门吸的最后安装位置。
3. After the final position is determined, position on the floor tile, and first position the stop position of the door. Use a pencil to confirm the position of the door on the floor tile, and the worker master uses a pencil to draw lines on the ground. First, confirm the final position of the door opening, and then confirm the final installation position of the door stopper.
4、在门定位好之后，画门吸的定位位置。工人师傅正在做门吸的最后位置的记号，之所以为什么要定位两次，既定位门，又要定位门吸，这是为了更好的安装。两点成直线，这是最好的确认门吸和开门的角度最好的方式。
4. After the door is positioned, draw the positioning position of the door stopper. The worker is marking the final position of the door stopper. Why should we position the door and the door stopper twice? This is for better installation. Two points are in a straight line, which is the best way to confirm the angle between the door stopper and the door opening.
5、接下来的工作，就是打电钻，在地面上钻门吸的安装孔。工人师傅正在地砖上钻孔，爱家泥瓦工人安装的磁砖也真够牢的，此款门吸只需要钻一个孔就可以了。
5. The next job is to drill the electric drill to drill the installation hole of the door stopper on the ground. The worker's master is drilling holes on the floor tiles. The tiles installed by Aijia clay tile workers are really firm. This door stopper only needs to drill a hole.
6、组装门吸固定端。安装门吸的固定端，旋紧上面的螺丝，门吸分为固定端和门端，固定端需要在安装前将螺丝拧紧，然后用附送的内络角扳手将齐固定旋紧在地面或者墙上。
6. Assemble the fixed end of the door stopper. Install the fixed end of the door stopper and tighten the screws on it. The door stopper is divided into a fixed end and a door end. The fixed end needs to tighten the screws before installation, and then use the attached internal angle wrench to tighten the screws on the ground or wall.
7、固定门吸在地面上用细小的内络角来拧螺丝这是一个精细活没经验不行，再经历确认位置、打孔、组装的程序后，接下来的工作就是地面安装固定端，用附送的内络角小工具拧紧固定端上面的螺丝，门吸就自动安装好了。
7. Fixing the door stopper on the ground and screwing the screws with a small internal angle is a fine job without experience. After going through the procedures of confirming the position, punching and assembling, the next task is to install the fixed end on the ground.
8、确认门端门吸的位置门上的门吸端只要用螺丝拧紧就可以了，门吸光安装好固定端还是没用的，也要门上的安装好，要害还是门端的定位，方法是先将门打开至最大，然后找到在门上的准确位置，用螺丝拧紧门端门吸。
8. Confirm the position of the door stopper at the door end. The door stopper on the door can only be tightened with screws. It is useless to install the fixed end of the door stopper. The key is to position the door end. The method is to open the door to the maximum, find the exact position on the door, and tighten the door stopper with screws.
9、微调微调门吸固定端的角度然后再完全拧紧，门吸安装的最后一步是微调，旋转门吸的角度，使之全部和门端门吸贴合，最后彻底拧紧螺丝。
9. Fine tune the angle of the fixed end of the door stopper, and then fully tighten it. The last step of the door stopper installation is to fine tune, rotate the angle of the door stopper to make it all fit with the door stopper at the door end, and finally fully tighten the screws.
门吸虽小，但是家装中不可缺少的一环。每家每户都要用到门吸，门吸在固定敞开的房门，防止房门撞击墙壁随意摇动方面有不小的作用，所以说门吸虽小作用却大大。安装门吸的方法和步骤-安装门吸详解安装流程。
Although the door stopper is small, it is an indispensable part of home decoration. Every family needs to use a door stopper. The door stopper plays a significant role in fixing the open door and preventing the door from hitting the wall and shaking at will. Therefore, although it is small, the door stopper has a great role. Methods and steps for installing the door stopper - detailed installation process for installing the door stopper.
门吸的作用大，但是安装起来也不得马虎，因为究竟它还是算运动件，要承受木门的撞击、拉扯，并且还要承受固定它的墙壁与地板地砖的应力，另外对门的影响也要考虑，所以说门吸的安装质量好坏，直接关系到门、墙壁、地板、地砖，还有人身的安全。
The door stopper has a great effect, but it should not be installed carelessly, because it is still a moving part. It should bear the impact and pull of the wooden door, and also bear the stress of the wall and floor tiles that fix it. In addition, the impact on the door should also be considered...
